Digi 34 Guide de l'utilisateur télécharger pdf (Page 48)

48 Chapter 4 IA Profiles and Procedures

Omron Family Profile: Serial-Connected Master

About This Profile

Use this profile if you want to connect a master device to the serial port

using one of the Omron serial port protocols, Hostlink, FINS, or

CompoWay/F.

Configuration Options

The serial port connection must be configured for the protocol required by

the master, in this case Hostlink, FINS, or CompoWay/F. If the remote

slave supports TCP socket communication, which includes a slave

connected to another device server, Digi recommends this network option.

UDP Sockets is another supported network option.

Locating Setup Information

To configure the port for one of the Omron protocols and the network for

TCP or UDP socket communication, see "Configuring a Serial-Connected

Master: TCP/UDP Sockets" on page 50.

Other Serial Port Protocol Profile: Serial-Connected Slave

About This Profile

Use this profile if you want to connect a slave device to the serial port using

any IA serial port protocol not previously discussed.

Configuration Options

In this configuration, you do not set up the port of the device server for an

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 99 100

Vikiqqs 04 Jan 2024 | 11:28:05

urenrjrjkvnm

Digi 34 Guide de l'utilisateur Page 48