Digi CM Guide de l'utilisateur télécharger pdf (Page 32)

Adding a Network Card

32 Chapter 3

4. Click Configure the detected card.

The following fields appear on the configuration page.

— ATA/IDE Fixed Disk Card configuration

Total data size to be used

- Enter the amount of memory you want to assign to

the compact-flash card for configuration files.

Delete all files in ATA/IDE Fixed Disk Card - Select the Delete button to clear the

compact-flash card of all files.

Format ATA/IDE Fixed Disk Card. - The options are EXT2 or FAT formats.

Select the format option and then select the Format button.

5. Enter the appropriate parameters on the configuration page.

6. Click Save to flash or Save & apply.

Adding a Network Card

To install and configure a network card on the Digi CM unit, do the following.

1. Insert the card into the PC slot.

2. Access the web interface.

3. Under the PC card heading, click Configuration.

Always select the

Stop card

service button

and Save & apply

before removing

the PC card.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 201 202

Pas de commentaire

Digi CM Guide de l'utilisateur Page 32