Digi ConnectPort Network Device Guide de l'utilisateur télécharger pdf (Page 129)

129

Display system information

System information displays the model, MAC address, firmware version, and bios version of the

ConnectPort LTS product. It also displays memory available: total, used, and free, and tracks CPU

percent utilization and the uptime.

From the web interface menu, select Administration > System Information. Select

General, Serial, or Network for the appropriate information. For descriptions of the information

displayed on these screens, see ―Display System Information.‖

Reboot the ConnectPort LTS product

Changes to some device settings require saving the changes and rebooting the ConnectPort LTS

product. To reboot a ConnectPort LTS product:

1. From the web interface menu, select Administration > Reboot.

2. On the Reboot page, click the Reboot button. Wait approximately 1 minute for the reboot

to complete.

Enable/disable access to network services

As needed, enable and disable access to various network services, such as ADDP, RealPort, SNMP,

Telnet and ssh. For example, for performance and security reasons, it may be desirable to disable

access to all network services not necessary for running or interfacing with the ConnectPort LTS

product. In the web interface, enabling and disabling network services is done on the Network

Services settings page for a ConnectPort LTS product. See "Network services settings".

1 2 ... 124 125 126 127 128 129 130 131 132 133 134 ... 148 149

Pas de commentaire

Digi ConnectPort Network Device Guide de l'utilisateur Page 129