Digi Edgeport/416 DB-9 Guide d'installation télécharger pdf (Page 4)

Edgeport Installation Guide (90000403 Rev. J) – Page 2

Edgeport/1, Edgeport/2, Edgeport/4,

Edgeport/4r, Edgeport/8, Edgeport/8r

The Edgeport/2, Edgeport/4, Edgeport/4r, Edgeport/8, and Edgeport/8r from Digi International are intelligent,

stackable expansion modules that connect to a PC or server running Windows 98, SE, CE, Me, NT 4.0, 2000, or

Windows XP via the Universal Serial Bus (USB), providing high-speed serial connectivity. For more detailed

information as well as the latest manual and technical updates, visit www.digi.com/support.

Cabling Edgeport

Type A Type B

Plug the Type A end of the USB cable into the USB port located in the back of your PC or into an available USB

port on a standard hub or into a Digi Hubport. Plug the Type B end of the USB cable into the back of the Edgeport.

If the drivers are not already installed, go to "Edgeport Driver Installation‖ on page 7.

Edgeport/4r and Edgeport/8r RJ-45 Pin Assignments

Use the table below to find the RJ-45 pin assignments for your Edgeport4.r and Edgeport/8r.

Signal Description DTE Use Pin #

RTS Request to Send Output 1

DSR Data Set Ready Input 2

DCD Data Carrier Detect Input 3

RXD Received Data Input 4

TXD Transmitted Data Output 5

SG Signal Ground Reference 6

DTR Data Terminal Ready Output 7

CTS Clear to Send Input 8

1 2 3 4 5 6 7 8 9 ... 22 23

Pas de commentaire

Digi Edgeport/416 DB-9 Guide d'installation Page 4