Digi XBee Guide de l'utilisateur télécharger pdf (Page 44)

XBee Sensor Adapter

LEDs and buttons

Assc

Ident

Power

blinking green

solid green

Power LED: Indicates that power is on. Illuminated only when adapter is connected to

external power only, not when powered by batteries. Not available in

lithium-battery models.

Assc LED: Indicates the adapter’s ZigBee network association status:

LED status Network association

On, solid green Not associated

On, blinking green Successfully joined

Reset button: Recessed button on underside of the adapter. Performs equivalent of a

power-cycle. Use a small non-conducive tool with a blunt end to press

gently and hold down button.

Ident button: Recessed button on power end of the adapter between Assc and Power

LEDs. Performs multiple functions for commissioning the adapter in a

ZigBee network. Consecutive button presses must occur within 800 ms of

each other to perform the desired action.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 72 73

Pas de commentaire

Digi XBee Guide de l'utilisateur Page 44