Digi LTS 32 Guide d'installation télécharger pdf (Page 61)

Syntax Configure port buffering

set buffer [clear] [clearbk]

[port={range|xbee|internalmodem}]

[size=number]

[state={on|off|pause}]

[autobk=(none|nfs|samba|sdmemory|usb)]

[autobk_size=0-64]

[syslog state={off|on}]

Display port buffering settings

set buffer [port=port]

Options clear

Clears the contents of the specified buffer.

clearbk

Clears the autobackup file

port

The port or ports to which the command applies. To configure settings for

the XBee port, specify port=xbee. And to configure settings for an internal

modem port, specify “port=internalmodem.”

size

The size in kilobytes to configure the buffer. Settings are configurable in 2-

kilobyte increments. The maximum size is 64 kilobytes. The default is 32

kilobytes.

state

The buffering state, which can be any of the following:

The data will be buffered.

off

The data will not be buffered and all data will be cleared from

the buffer.

pause

The data will not be buffered, but data in the buffer will not

be cleared.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 190 191

Pas de commentaire

Digi LTS 32 Guide d'installation Page 61