Digi 9XCite-PKG Manuel télécharger pdf (Page 36)

9XCite‐PKG‐R™RS‐232/485RFModem–ProductManualv2.1[2007.01.04]

©2007MaxStream,Inc.,Confidential&Proprietary‐AllRightsReserved 36

Limited Modular Approval

Power output is conducted at the antenna terminal and can be adjusted from 1 mill-watt to 1 Watt

at the OEM level. This is an RF modem approved for Limited Modular use operating as a mobile

transmitting device with respect to section 2.1091 and is limited to OEM installation for Mobile and

Fixed applications only. During final installation, end-users are prohibited from access to any pro-

gramming parameters. Professional installation adjustment is required for setting module power

and antenna gain to meet EIRP compliance for high gain antenna(s).

Final antenna installation and operating configurations of this transmitter including antenna gain

and cable loss must not exceed the EIRP of the configuration used for calculating MPE. Grantee

(MaxStream) must coordinate with OEM integrators to ensure the end-users and installers of prod-

ucts operating with the modem are provided with operating instructions to satisfy RF exposure

requirements.

The FCC grant is valid only when the device is sold to OEM integrators. Integrators are instructed

to ensure the end-user has no manual instructions to remove, adjust or install the device.

FCC-approved Antennas

WARNING: This device has been tested with Reverse Polarity SMA connectors with the

antennas listed in the tables of this section. When integrated into OEM products, fixed

antennas require installation preventing end-users from replacing them with non-

approved antennas. Antennas not listed in the tables must be tested to comply with FCC

Section 15.203 (unique antenna connectors) and Section 15.247 (emissions).

Fixed Base Station and Mobile Applications

MaxStream RF Modems are pre-FCC approved for use in fixed base station and mobile applica-

tions. When the antenna is mounted at least 20cm (8") from nearby persons, the application is

considered a mobile application.

Portable Applications and SAR Testing

When the antenna is mounted closer than 20cm to nearby persons, then the application is consid-

ered "portable" and requires an additional test be performed on the final product. This test is

called Specific Absorption Rate (SAR) testing and measures the emissions from the modem and

how they affect the person.

RF Exposure

This statement must be included as a CAUTION statement in OEM product manuals.

WARNING: This equipment is approved only for mobile and base station transmitting

devices. Antenna(s) used for this transmitter must be installed to provide a separation

distance of at least 30 cm from all persons and must not be co-located or operating in

conjunction with any other antenna or transmitter.

NOTE: The separation distance indicated in the above is 30 cm, but any distance greater than or

equal to 23 cm can be used (per MPE evaluation).

1 2 ... 31 32 33 34 35 36 37 38 39

Pas de commentaire

Digi 9XCite-PKG Manuel Page 36