Digi PortServer TS 8 Guide de l'utilisateur télécharger pdf (Page 43)

Chapter 9 Configuring IP Routing 43

set forwarding state=active poisonreverse=on splithorizon=on

set user name=link1...netrouting=off

Configuring Proxy ARP

This section describes how to configure device server for Proxy ARP.

Related Information

See the set forwarding command in the Digi One/PortServer TS Command

Reference.

Starting Point

This procedure assumes that you have signed on as root and have or will

configure modems, modem scripts, devices, and filters for routes that use

serial lines.

Procedure

1. Configure the links over which packets will be routed using a set user

command. This command must specify (on the ipaddr field) a specific

IP address for the remote system using the Proxy ARP service.

2. Configure device server for Proxy ARP by supplying a set forwarding

command that specifies the following:

• state=passive

• proxyarp=on

Example

In this example, device server provides Proxy ARP services to a remote

host.

set user name=link1...ipaddr=187.155.24.11

set forwarding state=passive proxyarp=on

Digi Device

Router

192.150.75.0

187.100.46.9

PPP

Digi Device

187.155.24.0

PPP

187.155.24.11

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 90 91

Pas de commentaire

Digi PortServer TS 8 Guide de l'utilisateur Page 43