Configuration Prerequisites
Chapter 1 Introduction 11
Configuration Prerequisites
Accessing the Command Line from a Locally-Connected Terminal
Use this procedure to access the command line and the configuration from a terminal connected to one of the
Digi One/PortServer TS 2/4’s serial ports.
1. Connect a terminal or PC to a serial port on the Digi One/PortServer TS 2/4. For a Windows HyperTerminal
connection, use the cable that came in the package.
2. Configure the parameters of the terminal or terminal emulation software to work with the Digi serial port. The
default port settings are:
• VT 100 emulation
• 9600 baud
• 8-bit character
• 1 stop bit
• No parity
3. Log in as the root user. The default password is dbps.
Logging On As Root from the Command Line
1. At the login prompt, enter the following: root
2. At the password prompt, supply the root password. The default is dbps.
Accessing the Command Line from a Telnet Session
Use this procedure to access the command line and the configuration from a Telnet session. This procedure
assumes that you have configure the Digi device with an IP address already. See "Configuring the IP Address"
on page 12.
1. To Telnet to the Digi One/PortServer TS 2/4, enter the following command from a command prompt on
another networked device, such as a server:
telnet ip-address
where ip-address is the Digi One/PortServer TS 2/4’s IP address
Example: telnet 192.3.23.5
2. Log in as the root user. The default password is dbps.
Accessing the Configuration from the Web Interface
Use this procedure to access the configuration from the web interface. This procedure assumes that you have
configured the Digi device with an IP address already. See "Configuring the IP Address" on page 12.
1. Access the Digi One/PortServer TS 2/4 from a web browser by specifying the Digi One/PortServer TS 2/4’s
IP address in the URL window.
2. Log on as root. The default password is dbps.
Commentaires sur ces manuels