Digi PortServer TS 8 Manuel de service télécharger pdf (Page 61)

Page 52 Command Reference

ports

Syntax: set ports option=value

Use set ports to set or display device configuration parameters. set ports range is used

to specify multiple ports, or one specific port. Options are:

auto bin dest dev dport edelay

group sess range save termtype uid

Each of the preceding will have their own options, as outlined in the following descriptions.

(More than one option can be included in a command.)

auto=on|off

auto on is used in conjunction with uid, dest and dport, to set up a port so

that a user on that port will bypass the PortServer's command shell and automatically

connect to the defined destination. (Also see set users name=auto on page 57, which

is similar except that a specified User is always connected to the specified

destination, bypassing the PortServer's command shell, without regard to what port

that user is using.) Important! login must be set to on for Auto users—see set

logins login= on page 51.

bin=on|off

Used in conjunction with auto to specify a binary connection. Default=off

dest=IPaddress

Use to specify the destination for the auto port. (See set ports auto).

dev=value

Set the port to a device as indicated in value. Possible values are term, host, prn,

min, mout, mio:

term Set the port to be a terminal.

host Set the port to mimic a modem for input only.

prn Set the port to be a printer.

min Set the port to be a modem for input only.

mout Set the port to be a modem for output only.

mio Set the port to be a modem for input and output.

Also see Devices and Wiring Considerations on page 93.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 126 127

Pas de commentaire

Digi PortServer TS 8 Manuel de service Page 61