Digi PortServer TS 8 Guide de l'utilisateur télécharger pdf (Page 35)

Chapter 8 Configuring Autoconnection 35

About Autoconnection

The autoconnection feature allows you to configure a user to access the

device server and then be automatically connected to a host on the LAN.

You can implement autoconnection in the following ways:

• By port where all port users are automatically connected to the

same host. The device server is completely transparent to them.

• By user where a user is required to log on and may be required to

supply a password, but once the user is authenticated, an automatic

connection to a host is made.

Configuring a Port for Autoconnection: Web Interface

This section describes how to configure a port for autoconnection from the

web interface.

1. Access the web interface by entering the device server IP address in a

browser’s URL window.

2. Log on to the device server as root. The default password is dbps.

3. Select Configure and then Autoconnect from the menu.

4. Configure the port as required. Use the online help for more informa-

tion.

5. To return to the main Ports menu, choose Ports from the Menu again.

Commands for Configuring Autoconnection by Port or by User

See the complete list of commands in the Digi One/PortServer TS

Command Reference. The commands needed for autoconnection either by

port or by user will be under the following commands in the Command

Reference on your Access Resource CD.

• set ports

• set user

Configuring a User for Autoconnection: Web Interface

1. Access the web interface by entering the device server IP address in a

browser’s URL window.

2. Log on to the device server as root. The default password is dbps.

3. Select Configure and then Users from the menu.

4. Choose Add User.

5. Enter a name and then choose Submit

6. Choose the new user from the Name column.

Chapter 8

Configuring Autoconnection

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 90 91

Pas de commentaire

Digi PortServer TS 8 Guide de l'utilisateur Page 35